SHARE
Top
Prefer to use a Glass Bowl? Well we got you covered! The bowl comes standard with a 14mm glass on glass taper, so it can easily be used on other 14mm glass waterpipes or simply swapped out with a glass on glass bowl.
Until now, clearing the chamber of tobacco smoke required the user to either pull the entire stem/bowl out of the water pipe or lift his/her finger off of a hole drilled in the side of the pipe.
With the SUBZERO waterpipe, all the user has to do is simply PUSH! By pressing the Bypass Valve down, air is allowed to enter below the bowl, producing the same exact effect at a fraction of the effort! When sleeve is released, it automatically springs back to the sealed position.
1) Closed: Smoke passes from bowl into base of water pipe
2) Open: Fresh air is injected beneath bowl
All markings on Stem been CNC engraved prior to anodizing, which means that the letters and logos are actually cut into the material, not just printed. Most importantly, this ensures that the markings will literally last a lifetime without fading!
Prior to anodizing the stem, we give the engraved surface a sleek and uniform brush finish by hand. This gives the stem a very unique, reflective surface which perfectly compliments the overall machined geometry.
Top
Diameter
1.290in
Height
5.450in
Materials
6061-T6 Aluminum Alloy
White Acetal (slide)
316 Stainless Steel spring
Nirtile Oring (threads)
Viton Orings (valve)
Aluminum Treatment
TypeIII Hardcoat Anodized
Manufacturing
CNC Turned and Milled
Assembly press-fitted
Tolerance
+/- 0.002 inches
Engraving
CNC Engraved
You must be 18 years of age or older to visit this site. By entering and/or accessing this Site, you are representing and warranting that you are 18 years of age or older.
If you are under 18 years of age, click here to exit now.
The term “waterpipe” is in reference to a device constructed for the sole purpose of filtering tobacco smoke/vapor via one or multiple water baths. Usage of this site is subject to our terms and conditions