Diffuser Cores
-
SHARE
Features
Top
Our waterpipe percolator cores currently come in two different variations: X3 and X5.
X3: 3-chamber equivalent.
X5: 5-Chamber equivalent
X3
X5
49 Percolator Retention Nozzles
23 Percolator Retention Nozzles
Retention Barrel Technology
Designed and patented by JET our retention barrel nozzle geometry ensures that the bubbles remain separate and as small as possible, which translates into maximum percolation!
For more info on retention barrels read here.
Our JT-X5 diffuser is equipped with 49 retention barrels, and our JT-X3 diffuser is equipped with 23 retention barrels.
Clog Prevention
Not only were our retention barrel percs designed for maximum filtration, but we also added in some clog protection.
When smoke travels through the diffuser, it must first pass through the "nozzle" which just so happens to be the smallest and therefore most likely region to clog. So in order to keep the waterpipe from clogging, we reduced the height, H of the nozzle thereby reducing the amount of surface area available for the tar to deposit on.
This guarantees that you will spend more time smoking and less time unclogging your waterpipe.
CFD engineered
Here at JET waterpipes, we use Computational Fluid Dynamics (CFD) as an aid in the design of our pipes. CFD gives us extremely accurate data relating to the temperature and pressure of the smoke while passing through cavities and chambers of varying size and materials. CFD can also show us how the thermal energy passes from one material to the next.
What does this mean?
Having the ability to quantify pressure and temperature at various locations gave us insight into the non-visible, non-obvious behavior of the smoke. Insight that was then used to mathematically tune the core's geometry for optimal, unmatched smoke filtration. Basically ensuring that the tars get removed and the smoke (properly) gets diffused, giving you one of the cleanest draws available.
Unscrews for easy cleaning
Pipe core assembly unscrews so that you can easily access the diffuser underside for cleaning, making it the worlds easiest-to-clean percolator.
Specifications
Top
Assembly Diameter
1.125in
Assembly Height
2.54in
Tolerance
+/-0.002in
Materials
6061-T6 Aluminum Alloy (hard coat anodized)
Acetal Thermoplastic
Nitrile oring and ball
Finish
Aluminum - Blasted with TypeIII Hardcoat anodizing
Filter Core - machined finish
Manufacturing
CNC turned
CNC Milled
CNC Drilled
Engraving
Filter Core - CNC Engraved with "X3" or "X5"
You must be 18 years of age or older to visit this site. By entering and/or accessing this Site, you are representing and warranting that you are 18 years of age or older.
If you are under 18 years of age, click here to exit now.
The term “waterpipe” is in reference to a device constructed for the sole purpose of filtering tobacco smoke/vapor via one or multiple water baths. Usage of this site is subject to our terms and conditions